substitutions:
  name: "gosund-ep2"
  friendly_name: "Gosund EP2"
  # Higher value gives lower watt readout
  current_res: "0.00221" # geeicht mit 2000W Heizlüfter
  # Lower value gives lower voltage readout
  voltage_div: "733"

esphome:
  name: "${name}"
  # Friendly names are used where appropriate in Home Assistant
  friendly_name: "${friendly_name}"
  # Automatically add the mac address to the name
  # so you can use a single firmware for all devices
  name_add_mac_suffix: true

  # This will allow for (future) project identification,
  # configuration and updates.
  project:
    name: jhbruhn.gosund-ep2
    version: "1.0"
logger:

api:

ota:
  password: "update5938"

wifi:
  ap:
    password: "12345678"

web_server:

captive_portal:

dashboard_import:
  package_import_url: github://jhbruhn/esphome-firmware/plug/gosund-ep2.yaml@main
  import_full_config: true

esp8266:
  board: esp8285

time:
  - platform: homeassistant
    id: homeassistant_time

binary_sensor:
  # Binary sensor for the button press
  - platform: gpio
    name: "Button"
    internal: true
    pin:
      number: GPIO13
      inverted: true
    on_press:
      - switch.toggle: relay

switch:
  - platform: gpio
    id: relay
    name: "Schalter"
    pin: GPIO15
    restore_mode: RESTORE_DEFAULT_ON
    on_turn_on:
      - light.turn_on: led
    on_turn_off:
      - light.turn_off: led

sensor:
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: True
    cf_pin: GPIO05
    cf1_pin: GPIO04
    current_resistor: ${current_res}
    voltage_divider: ${voltage_div}
    current:
      name: "Strom"
      unit_of_measurement: A
      id: current
    voltage:
      name: "Spannung"
      unit_of_measurement: V
      id: voltage
    power:
      name: "Leistung"
      unit_of_measurement: W
      id: "wattage"
      filters:
        - sliding_window_moving_average:
            window_size: 6
            send_every: 3
    change_mode_every: 16
    update_interval: 5s
  - platform: total_daily_energy
    name: "Tagesverbrauch"
    power_id: "wattage"
    filters:
      # Multiplication factor from W to kW is 0.001
      - multiply: 0.001
    unit_of_measurement: kWh

  - platform: uptime
    name: Uptime

  - platform: wifi_signal
    name: WiFi Signal
    update_interval: 60s

output:
  # blue LED
  - platform: esp8266_pwm
    id: state_led
    pin:
      number: GPIO02
      inverted: true

light:
  # Relay state light
  - platform: monochromatic
    output: state_led
    id: led

# green LED
status_led:
  pin:
    number: GPIO00
    inverted: true

button:
  - platform: factory_reset
    name: Restart with Factory Default Settings