Enhance the error handling system with detailed descriptions and step-by-step
solutions for all Brother PP1 protocol error codes. This provides users with
clear, actionable guidance when machine errors occur.
Added detailed error information for:
- Thread errors (0x00, 0x60-0x63): Upper/lower thread issues with rethreading steps
- Safety errors (0x01-0x03): Safety device activations and bobbin issues
- Restart errors (0x10-0x1C): System malfunctions with specific error codes (M519411-M51941C)
- Mechanical errors (0x20-0x21): Needle plate and thread lever positioning
- Hoop errors (0x70-0x72): Hoop detection and initialization procedures
- Maintenance errors (0x80, 0x98): Regular inspection and settings constraints
Each error now includes:
- Clear title describing the issue
- Detailed description of what the error means
- Step-by-step solutions for resolution
- Support contact information where applicable
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Dark Mode Implementation:
- Add Tailwind config with darkMode: 'media' for system preference detection
- Update all 9 components with 200+ dark mode variants
- Semantic color backgrounds with semi-transparent overlays in dark mode
- Proper text contrast (gray-900/gray-100) for readability
- Enhanced borders, shadows, and focus rings for dark backgrounds
Component Dark Mode Updates:
- App.tsx: Header gradient, error banners, empty states
- MachineConnection: Status badges with proper dark variants for all states
- FileUpload: Pattern info cards, thread swatches, upload progress
- PatternCanvas: Canvas background, overlays, zoom controls
- ProgressMonitor: Color blocks, progress bars, state indicators with colored icons
- NextStepGuide: All status boxes (blue/yellow/cyan/green/red)
- WorkflowStepper: Progress indicators and step states
- ConfirmDialog: Modal overlays and dialog backgrounds
- KonvaComponents: Grid lines and origin markers
Pattern Visibility Improvements:
- Pattern shows full opacity (1.0) when unlocked for easy positioning
- Pattern shows reduced opacity (0.75) for unstitched areas when locked/uploading
- Helps distinguish completed vs pending stitches during sewing
- Pattern locks during upload to prevent accidental repositioning
- Canvas dragging disabled when pattern is uploading or uploaded
Status Indicator Enhancements:
- Machine status badges: All states (idle/active/waiting/complete/error) have dark variants
- Progress monitor state icons: Colored icons (blue/yellow/green/red) in both modes
- Color blocks: Proper backgrounds and borders for completed/current/pending states
- All semantic colors maintain visibility and meaning in dark mode
Canvas Lock Behavior:
- Pattern locked during upload (uploadProgress > 0 && < 100)
- Pattern locked after upload (patternUploaded = true)
- Lock indicator shows amber background with lock icon
- Cursor changes prevent confusion about draggability
- Full opacity during positioning, transparency during progress tracking
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Loading State Improvements:
- Add SkeletonLoader component with pattern info, canvas, and connection skeletons
- Show loading spinner on file selection and during pattern upload
- Display upload progress with enhanced progress bar and percentage
- Add success confirmation message when upload completes
- Show thread color preview dots inline with pattern info (up to 5 colors)
Visual Polish & Animations:
- Add custom animations: fadeIn, slideInRight, pulseGlow, skeleton-loading
- Enhance all cards with subtle hover shadow effects
- Improve header with richer gradient (blue-600 → blue-700 → blue-800)
- Polish error messages with icons and improved layouts
- Enhance empty state with decorative patterns and feature highlights
- Add smooth transitions to all NextStepGuide states
- Current color block pulses with blue glow animation
- Color blocks have hover states for better interactivity
Pattern Upload & Lock Functionality:
- Hide upload button after pattern is uploaded (patternUploaded && uploadProgress === 100)
- Disable pattern dragging when uploaded with visual lock indicator
- Pattern position overlay shows amber background with lock icon when locked
- Pattern remains in canvas after deletion for re-editing and re-upload
- Delete pattern from cache when deleting from machine to prevent auto-resume
- Add LockClosedIcon to indicate locked pattern state
Pattern Management:
- Keep pattern data in UI after deletion for repositioning and re-uploading
- Clear machine-related state but preserve pattern visualization
- Reset upload progress and pattern uploaded state on deletion
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Visual enhancements:
- Create design tokens system with semantic colors (primary, success, warning, danger, info, neutral)
- Enhanced button states with hover shadow, active press feedback, and focus rings
- Improved WorkflowStepper with larger circles, gradient progress bar, and green completion indicators
- Enhanced color blocks with larger swatches (w-8 h-8), better shadows, and animated current indicator
- Reorganized ProgressMonitor layout - progress/controls on left, color blocks on right
- Moved disconnect button to header as small, compact button
Accessibility improvements:
- Added comprehensive ARIA labels to all interactive elements
- Implemented proper focus states with color-matched rings
- Added role attributes for navigation and progress elements
- Enhanced screen reader support with descriptive labels
- All buttons now meet 44px touch target requirements
Button improvements across all components:
- Standardized to rounded-lg for softer appearance
- Added hover:shadow-lg for depth perception
- Added active:scale-[0.98] for tactile feedback
- Clean disabled states without grayscale filter
- Keyboard navigation with visible focus rings
- Consistent transition timing (150ms)
Typography:
- Maintained minimum 12px text size throughout
- Proper hierarchy with defined heading sizes
- Improved readability with consistent weights
Documentation:
- Created comprehensive UI design analysis
- Implementation guides and checklists
- Before/after examples
- Design tokens reference
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Major fixes:
- Fix PEN data encoding to properly mark color changes and end markers
- COLOR_END (0x03) for intermediate color blocks
- DATA_END (0x05) for the final stitch only
- Machine now correctly reads total stitch count across all color blocks
- Reset uploadProgress when pattern is deleted to re-enable upload button
- Allow pattern deletion during WAITING states
- Allow pattern upload in COMPLETE states
- Fix pattern state tracking to reset when patternInfo is null
UI improvements:
- Integrate workflow stepper into compact header
- Change app title to "SKiTCH Controller"
- Reduce header size from ~200px to ~70px
- Make Sewing Progress section more compact with two-column layout
- Replace emojis with Heroicons throughout
- Reorganize action buttons with better visual hierarchy
- Add cursor-pointer to all buttons for better UX
- Fix cached pattern not showing info in Pattern File box
- Remove duplicate status messages (keep only state visual indicator)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Install @heroicons/react package
- Replace text symbols with proper heroicons:
- Zoom controls: PlusIcon, MinusIcon, ArrowPathIcon
- Color block status: CheckCircleIcon, ArrowRightIcon, CircleStackIcon
- Resume sewing: PlayIcon
- Remove hover:-translate-y-0.5 and active:translate-y-0 from all buttons
- Buttons now have stable hover states (color change and shadow only)
- Improved UI consistency and accessibility with vector icons
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
React-Konva Migration:
- Create KonvaComponents.tsx with declarative components
- Convert Grid, Origin, Hoop, Stitches, PatternBounds, and CurrentPosition to React components
- Add React.memo and useMemo for performance optimization
- Remove imperative layer manipulation (destroyChildren, add, batchDraw)
- Remove backgroundLayerRef and patternLayerRef
- Let React handle component lifecycle and updates
- Improve performance through React's diffing algorithm
Pattern Offset Persistence:
- Add patternOffset field to CachedPattern interface
- Update PatternCacheService.savePattern to accept and store offset
- Modify useBrotherMachine to save offset when uploading pattern
- Update resumedPattern state to include offset information
- Restore cached pattern offset in App.tsx on resume
- Add initialPatternOffset prop to PatternCanvas component
- Pattern position now persists across page reloads and reconnections
Benefits:
- More maintainable and React-idiomatic code
- Better performance with large patterns
- Automatic cleanup and no memory leaks
- Pattern positioning workflow preserved across sessions
- Improved developer experience
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Install Tailwind CSS and configure Vite plugin
- Replace all custom CSS classes with Tailwind utility classes
- Migrate all components to use Tailwind styling:
- App.tsx: Responsive layout with modern styling
- MachineConnection: Status badges and action buttons
- FileUpload: File input and progress bars with shimmer effect
- ProgressMonitor: Color blocks, state indicators, and actions
- ConfirmDialog: Modal overlay with backdrop blur
- PatternCanvas: Canvas viewer with floating controls
- Add custom shimmer animation for progress bars
- Fix canvas resizing issue during zoom operations:
- Add ResizeObserver for stable container dimensions
- Use clientWidth/clientHeight instead of offset dimensions
- Cache container size to prevent layout thrashing
- Improve zoom button behavior to zoom towards viewport center
- Maintain consistent design with shadows, borders, and transitions
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Replace vanilla Konva imperative API with react-konva declarative components
- Use Stage, Layer, and Group components from react-konva
- Remove complex ResizeObserver and containerSize state management
- Stage dimensions now read directly from CSS-defined container size
- Eliminates React/Konva DOM conflicts and feedback loops
- Cleaner, more maintainable React-friendly code
- All functionality preserved: pan, zoom, pattern dragging
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Separate Konva container from React-managed overlays to prevent removeChild errors
- Move wheel zoom handler into stage initialization to maintain stable reference
- Remove zoomLevel from background effect dependencies to prevent zoom reset
- Add double-initialization guard for stage creation
- Clear refs before stage destruction to prevent race conditions
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Replace vanilla canvas with Konva.js for better interactivity
- Add pan and zoom functionality (mouse wheel zoom, drag to pan)
- Make pattern draggable within hoop coordinate system
- Center canvas on embroidery origin (0,0)
- Default zoom shows entire 100x100mm hoop
- Pass user-defined pattern offset to LAYOUT command
- Replace auto-centering with manual pattern positioning
- Add visual overlays for thread legend, dimensions, pattern position, and zoom controls
- Fix effect dependencies to prevent drag interruption on machine status updates
- Memoize callbacks to prevent unnecessary re-renders
- Create konvaRenderers.ts utility for rendering grid, hoop, stitches, etc.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Use PyStitch raw stitches with proper command flag handling
- Import constants from pystitch.EmbConstant (STITCH, JUMP, TRIM, etc.)
- Filter COLOR_CHANGE, STOP, and END command-only stitches
- Properly encode jump/trim stitches with PEN_FEED_DATA flag
- Add pattern centering with moveX/moveY in layout
- Fix color change detection and PEN_COLOR_END marking
- Add comprehensive debug logging for pattern analysis
- Fix machine state helpers for IDLE and MASK_TRACE_COMPLETE states
- Update ProgressMonitor UI for proper button visibility
- Add error handling for undefined error codes
Machine now successfully uploads patterns, completes mask trace,
and transitions to sewing mode.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
